LED strip · For home

COB 24 V - 15 W/m / 3000 K/4000 K / IP20

Name: COB 24 V - 15 W/m / 3000 K/4000 K / IP20
Brand: AGGE
SKU: HS19784
Rating: 5.0 (28 reviews)

5.0 · 28 reviews Read reviews at Valostore

A 15 W/m COB LED strip for dry spaces, suitable for creating both indirect and direct lighting in high spaces. Spot-free and even light! Available in 3000K or 4000K color temperatures, in 250 cm or 500 cm rolls. Can be shortened, extended and dimmed.

AGGE 24 V LED strip is a high-quality 15 W/m (1350 lm/m) light strip for dry spaces (IP20). Its power makes it ideal for creating both direct and indirect lighting in high spaces, such as recessed into the ceiling of a living room. It can also be used as mood lighting in larger spaces. As a COB type strip, there are no individual LEDs visible, but it glows completely uniformly along its entire length, ensuring perfect spot-free and even lighting. Available in either a warm 3000 K or neutral 4000 K color temperature, in 250 cm or 500 cm rolls. The strip can be shortened or extended and dimmed according to your needs.

View at Valostore Opens valostore.com. Other countries under Where to buy.

Specifications

Product	AGGE 24 V 15 W/m, IP20
Intended use	Creating direct and indirect lighting in dry spaces
Operating voltage	24 V
Manufacturer's declared light output	3000 K: 1350 lm/m • 4000 K: 1500 lm/m
Manufacturer's declared power	15 W/m
Color tone	3000 K or 4000 K
Color rendering (CRI)	Ra90+
Light beam angle	120°
Dimmable	Yes
Dimensions	2500/5000 x 1.6 x 10 mm (Length x Thickness x Width)
Connection cable length	2000 mm
Operating temperature	-20°C - +40°C
Lifespan	50,000 hours
Other	Pre-assembled connectors on both ends of the tape (Female DC 5.5 mm), 3M tape on the back for attachment
IP rating	IP20
Approvals	CE, RoHS
Warranty	24 months

As declared on the Valostore product page. Where Valostore has measured a value itself, it is marked as measured.

Variants

3000 K / 250 cmView at Valostore
3000 K / 500 cmView at Valostore
4000 K / 250 cmView at Valostore
4000 K / 500 cmView at Valostore

Installation and safety: 24 V and 12 V LED strips

Low-voltage strips: 24 V DC or 12 V DC depending on the model. Use only a compatible AGGE transformer and never connect the strip directly to a mains socket.
The low-voltage side can be connected by a layman. The DC plug fits the AGGE transformer directly.
Size the transformer from the strip’s power per metre times the length. A quick connector carries at most 5 A, which is 120 W at 24 V.
Cut only at the marked cutting points. Minimum bending radius 30 mm. Do not twist the strip.
IP20 strips are for dry indoor use only. On IP65 strips, seal a cut end with the supplied shrink tube.
The strip warms up in use. An aluminium profile is recommended: it cools the strip and protects it. Do not leave a strip switched on while coiled for more than 10 seconds.
If you dim from a wall switch on the 230 V side, use a dimmable transformer. If the dimmer sits between transformer and strip, use a normal transformer.

Source: AGGE 12/24 V LED strip manual. Read the full manual before installing.