LED strip kit for backsplash, White profile - Complete kit

LED strip kit for backsplash · For home

LED strip kit for backsplash, White profile - Complete kit

4.8 · 94 reviews Read reviews at Valostore

A ready-made LED strip set designed for the backsplash the kitchen or utility room, including LED strip, transformer and white mounting profiles. Available in warm 3000K or neutral 4000K color temperature, in 200, 250 or 500 cm sets. Both strips and mounting profiles can be shortened to suit your needs. Suitable for both fixed installations and for plugging into a socket.

A very impressive LED strip set designed for the space between the kitchen and the utility room, which allows the lighting of the space between the kitchen and the utility room to be implemented in a modern and stylish way. The complete set, assembled from AGGE's high-quality accessories, includes everything you need for installation: you can choose a 10 W/m strip with a warm 3000 K or neutral 4000 K color temperature, a color temperature adjustable CCT strip, or a colorful RGB+CCT strip. In addition, a transformer and aluminum installation profiles with a white frame and their brackets are included. The sets with color temperature adjustable and RGB strip also include a remote control for controlling the strip and a control unit that can be connected to the LED strip. Easy installation!

View at Valostore Opens valostore.com. Other countries under Where to buy.

Specifications

ProductLED strip set AGGE 24 V - Spacers / white profile
PurposeCreating lighting in an intermediate space
Operating voltage24 V
Color temperature3000 K or 4000 K
LED strip power10 W/m
LED strip length250 or 500 cm
Color rendering (CRI)Ra90+
Warranty24 months

As declared on the Valostore product page. Where Valostore has measured a value itself, it is marked as measured.

In the box

  • LED strip AGGE COB 24 V, 250 cm
  • 3000 K or 4000 K (choose from product options)

Variants

Installation and safety: 24 V kit

  • Low-voltage strips: 24 V DC or 12 V DC depending on the model. Use only a compatible AGGE transformer and never connect the strip directly to a mains socket.
  • The low-voltage side can be connected by a layman. The DC plug fits the AGGE transformer directly.
  • Size the transformer from the strip’s power per metre times the length. A quick connector carries at most 5 A, which is 120 W at 24 V.
  • Cut only at the marked cutting points. Minimum bending radius 30 mm. Do not twist the strip.
  • IP20 strips are for dry indoor use only. On IP65 strips, seal a cut end with the supplied shrink tube.
  • The strip warms up in use. An aluminium profile is recommended: it cools the strip and protects it. Do not leave a strip switched on while coiled for more than 10 seconds.
  • If you dim from a wall switch on the 230 V side, use a dimmable transformer. If the dimmer sits between transformer and strip, use a normal transformer.

Source: AGGE 12/24 V LED strip manual. Read the full manual before installing.

Documents and videos

Related AGGE products