LED strip kit for sauna · For home

LED strip kit for sauna, Complete kit

Name: LED strip kit for sauna, Complete kit
Brand: AGGE
SKU: HSKIT606
Rating: 4.6 (65 reviews)

4.6 · 65 reviews Read reviews at Valostore

A ready-made LED strip set designed for sauna rooms, including LED strip, transformer and mounting profiles. LED strip available in warm 3000K or neutral 4000K color temperature, in 200, 250 or 500 cm sets. Both the strip and the mounting profiles can be shortened to suit your needs.

A truly stunning LED strip set designed for saunas, which allows you to create soft and indirect ambient lighting in sauna rooms. The complete set, assembled from AGGE's high-quality accessories, includes everything you need for installation. You can choose either a standard 3000 K or 4000 K 8 w/m strip, a color temperature-adjustable CCT strip or a colorful RGB+CCT strip, and all the necessary tools for a neat installation are included (transformer, installation profiles and brackets). Easy to install!

View at Valostore Opens valostore.com. Other countries under Where to buy.

Specifications

Product	LED strip set for sauna AGGE 24 V
Intended use	Creating mood lighting in the sauna
Operating voltage	24 V
Color temperature	3000 K or 4000 K
LED strip power	8 W/m
LED strip length	250 or 500 cm
Color rendering (CRI)	Ra90+
LED strip IP rating	IP65
Transformer IP rating	IP67
Warranty	24 months

As declared on the Valostore product page. Where Valostore has measured a value itself, it is marked as measured.

In the box

LED strip AGGE COB 8 W/m 24 V, 250 cm
3000 K or 4000 K (choose from product options)

Variants

3000 K / 200 cmView at Valostore
3000 K / 250 cmView at Valostore
3000 K / 500 cmView at Valostore
4000 K / 200 cmView at Valostore
4000 K / 250 cmView at Valostore
4000 K / 500 cmView at Valostore
CCT / 500 cmView at Valostore
RGB+CCT / 500 cmView at Valostore

Installation and safety: 24 V kit

Low-voltage strips: 24 V DC or 12 V DC depending on the model. Use only a compatible AGGE transformer and never connect the strip directly to a mains socket.
The low-voltage side can be connected by a layman. The DC plug fits the AGGE transformer directly.
Size the transformer from the strip’s power per metre times the length. A quick connector carries at most 5 A, which is 120 W at 24 V.
Cut only at the marked cutting points. Minimum bending radius 30 mm. Do not twist the strip.
IP20 strips are for dry indoor use only. On IP65 strips, seal a cut end with the supplied shrink tube.
The strip warms up in use. An aluminium profile is recommended: it cools the strip and protects it. Do not leave a strip switched on while coiled for more than 10 seconds.
If you dim from a wall switch on the 230 V side, use a dimmable transformer. If the dimmer sits between transformer and strip, use a normal transformer.

Source: AGGE 12/24 V LED strip manual. Read the full manual before installing.

Using the kit in a sauna

The kit is sold for mood lighting in the sauna: an IP65 strip with an IP67 transformer.
IP ratings describe protection against water, not heat. The strip’s declared operating range is the same as other AGGE 24 V strips, so keep it low in the room, away from the stove, where the temperature stays within the range on the product page.
Verify placement and the transformer location against the instructions in the box before installing.

Source: Sauna kit product page and the AGGE 12/24 V LED strip manual. Read the full manual before installing.